LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-SL182124

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireStarry - Flood & Spike Lights, 40 degLamp / LEDIntegrated LED module
Luminous flux2,640 lmInput power24.0 W
Efficacy110.0 lm/WCCT
CRI>90BUG rating (TM-15-11)B3-U0-G0
Beam angle (50% Imax)40.0°Field angle (10% Imax)66.0°
Voltage12V, 24V, 220V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity5,524.5 cd
At angle0° VLuminous shapeCircular
Luminous size446 mm dia.Spacing/height (nominal)1.30

Luminous intensity (cd)

138127624143552590°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°2,33688.5%
0–60°2,640100.0%
0–90° (total)2,640100.0%

Flux emitted within each downward cone. 59% of the total falls inside the rated beam angle.

BUG rating B3-U0-G0

ZoneBack lmFront lm
Low 0–30°1,1681,168
Mid 30–60°152152
High 60–80°00
Very high 80–90°00
Uplight 90–100° / 100–180°0 / 0

Backlight, Uplight and Glare classes from the zone lumens, IES TM-15-11 limits. Calculated from this distribution.

Illuminance cone

1 m5525 luxØ0.7 m2 m1381 luxØ1.5 m3 m614 luxØ2.2 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
5,524.546°33.1
5,521.647°25.3
5,509.348°19.1
5,484.349°14.3
5,444.650°10.7
5,388.851°7.9
5,315.652°5.8
5,224.753°4.2
5,115.754°3.0
4,988.955°2.1
10°4,844.656°1.5
11°4,683.857°1.1
12°4,507.758°0.7
13°4,317.659°0.0
14°4,115.360°0.0
15°3,902.761°0.0
16°3,682.062°0.0
17°3,455.363°0.0
18°3,224.964°0.0
19°2,993.265°0.0
20°2,762.366°0.0
21°2,534.467°0.0
22°2,311.568°0.0
23°2,095.569°0.0
24°1,888.170°0.0
25°1,690.571°0.0
26°1,504.072°0.0
27°1,329.573°0.0
28°1,167.574°0.0
29°1,018.575°0.0
30°882.576°0.0
31°759.477°0.0
32°649.078°0.0
33°550.879°0.0
34°464.180°0.0
35°388.281°0.0
36°322.482°0.0
37°265.883°0.0
38°217.584°0.0
39°176.785°0.0
40°142.486°0.0
41°113.987°0.0
42°90.488°0.0
43°71.289°0.0
44°55.690°0.0
45°43.1

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m1,3819382513541.5 m
2.5 m88469830277151.8 m
3.0 m614525296112312.2 m
3.5 m451404268130492.5 m
4.0 m345318234135632.9 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².