LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-ODL3723203

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireCuby - Wall Surface, 36 degLamp / LEDIntegrated LED module
Luminous flux450 lmInput power6.0 W
Efficacy75.0 lm/WCCT
CRI>90BUG rating (TM-15-11)B1-U0-G0
Beam angle (50% Imax)36.0°Field angle (10% Imax)59.4°
VoltageAC220~277V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity1,157.8 cd
At angle0° VLuminous shapeCircular
Luminous size102 mm dia.Spacing/height (nominal)1.14

Luminous intensity (cd)

289579868115890°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°42093.4%
0–60°450100.0%
0–90° (total)450100.0%

Flux emitted within each downward cone. 59% of the total falls inside the rated beam angle.

BUG rating B1-U0-G0

ZoneBack lmFront lm
Low 0–30°210210
Mid 30–60°1515
High 60–80°00
Very high 80–90°00
Uplight 90–100° / 100–180°0 / 0

Backlight, Uplight and Glare classes from the zone lumens, IES TM-15-11 limits. Calculated from this distribution.

Illuminance cone

1 m1158 luxØ0.6 m2 m289 luxØ1.3 m3 m129 luxØ1.9 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
1,157.846°1.6
1,157.047°1.1
1,153.748°0.8
1,147.049°0.5
1,136.350°0.4
1,121.351°0.3
1,101.852°0.2
1,077.553°0.0
1,048.754°0.0
1,015.355°0.0
10°977.756°0.0
11°936.157°0.0
12°891.058°0.0
13°842.959°0.0
14°792.460°0.0
15°740.161°0.0
16°686.662°0.0
17°632.763°0.0
18°578.964°0.0
19°525.965°0.0
20°474.266°0.0
21°424.567°0.0
22°377.068°0.0
23°332.369°0.0
24°290.570°0.0
25°252.071°0.0
26°216.872°0.0
27°185.073°0.0
28°156.574°0.0
29°131.275°0.0
30°109.176°0.0
31°89.977°0.0
32°73.578°0.0
33°59.579°0.0
34°47.780°0.0
35°37.981°0.0
36°29.882°0.0
37°23.383°0.0
38°18.084°0.0
39°13.785°0.0
40°10.486°0.0
41°7.887°0.0
42°5.888°0.0
43°4.389°0.0
44°3.190°0.0
45°2.2

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m28918036301.3 m
2.5 m18513949911.6 m
3.0 m129106531631.9 m
3.5 m9583502162.3 m
4.0 m7266452392.6 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².