LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-ODL376010

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireLEGGERA - Wall Surface, 45 degLamp / LEDIntegrated LED module
Luminous flux1,200 lmInput power10.0 W
Efficacy120.0 lm/WCCT
CRI>90BUG rating (TM-15-11)B1-U0-G0
Beam angle (50% Imax)45.0°Field angle (10% Imax)74.2°
VoltageAC220~240V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity1,995.6 cd
At angle0° VLuminous shapeCircular
Luminous size350 mm dia.Spacing/height (nominal)1.51

Luminous intensity (cd)

4999981497199690°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°97681.3%
0–60°1,200100.0%
0–90° (total)1,200100.0%

Flux emitted within each downward cone. 59% of the total falls inside the rated beam angle.

BUG rating B1-U0-G0

ZoneBack lmFront lm
Low 0–30°488488
Mid 30–60°112112
High 60–80°00
Very high 80–90°00
Uplight 90–100° / 100–180°0 / 0

Backlight, Uplight and Glare classes from the zone lumens, IES TM-15-11 limits. Calculated from this distribution.

Illuminance cone

1 m1996 luxØ0.8 m2 m499 luxØ1.7 m3 m222 luxØ2.5 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
1,995.646°42.2
1,994.847°34.4
1,991.448°27.9
1,984.649°22.4
1,973.850°18.0
1,958.551°14.3
1,938.452°11.3
1,913.453°8.9
1,883.254°6.9
1,847.955°5.3
10°1,807.556°4.1
11°1,762.157°3.1
12°1,711.958°2.4
13°1,657.259°1.8
14°1,598.360°1.4
15°1,535.761°1.0
16°1,469.862°0.7
17°1,401.063°0.5
18°1,330.064°0.4
19°1,257.365°0.3
20°1,183.566°0.2
21°1,109.167°0.0
22°1,034.868°0.0
23°961.069°0.0
24°888.470°0.0
25°817.471°0.0
26°748.572°0.0
27°682.073°0.0
28°618.474°0.0
29°557.975°0.0
30°500.876°0.0
31°447.277°0.0
32°397.278°0.0
33°351.079°0.0
34°308.580°0.0
35°269.781°0.0
36°234.482°0.0
37°202.783°0.0
38°174.384°0.0
39°149.085°0.0
40°126.686°0.0
41°107.087°0.0
42°89.988°0.0
43°75.189°0.0
44°62.390°0.0
45°51.4

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m4993641272651.7 m
2.5 m31926313445122.1 m
3.0 m22219512357212.5 m
3.5 m16314910760282.9 m
4.0 m1251179159323.3 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².