LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-ODL3748718

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireWICAH - Wall Surface, 36 degLamp / LEDIntegrated LED module
Luminous flux960 lmInput power8.0 W
Efficacy120.0 lm/WCCT
CRI>90BUG rating (TM-15-11)B1-U0-G0
Beam angle (50% Imax)36.0°Field angle (10% Imax)59.4°
VoltageAC220~240V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity2,470.0 cd
At angle0° VLuminous shapeCircular
Luminous size143 mm dia.Spacing/height (nominal)1.14

Luminous intensity (cd)

61812351853247090°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°89793.4%
0–60°960100.0%
0–90° (total)960100.0%

Flux emitted within each downward cone. 59% of the total falls inside the rated beam angle.

BUG rating B1-U0-G0

ZoneBack lmFront lm
Low 0–30°448448
Mid 30–60°3232
High 60–80°00
Very high 80–90°00
Uplight 90–100° / 100–180°0 / 0

Backlight, Uplight and Glare classes from the zone lumens, IES TM-15-11 limits. Calculated from this distribution.

Illuminance cone

1 m2470 luxØ0.6 m2 m618 luxØ1.3 m3 m274 luxØ1.9 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
2,470.046°3.4
2,468.347°2.4
2,461.248°1.7
2,446.949°1.2
2,424.150°0.8
2,392.151°0.5
2,350.452°0.4
2,298.853°0.0
2,237.254°0.0
2,166.055°0.0
10°2,085.756°0.0
11°1,997.057°0.0
12°1,900.858°0.0
13°1,798.259°0.0
14°1,690.560°0.0
15°1,578.961°0.0
16°1,464.862°0.0
17°1,349.863°0.0
18°1,235.064°0.0
19°1,121.965°0.0
20°1,011.766°0.0
21°905.567°0.0
22°804.368°0.0
23°708.969°0.0
24°619.870°0.0
25°537.671°0.0
26°462.572°0.0
27°394.673°0.0
28°333.874°0.0
29°280.075°0.0
30°232.876°0.0
31°191.877°0.0
32°156.778°0.0
33°126.979°0.0
34°101.780°0.0
35°80.981°0.0
36°63.782°0.0
37°49.683°0.0
38°38.384°0.0
39°29.385°0.0
40°22.286°0.0
41°16.787°0.0
42°12.488°0.0
43°9.189°0.0
44°6.690°0.0
45°4.8

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m61838576701.3 m
2.5 m3952971062021.6 m
3.0 m2742271123471.9 m
3.5 m20217610744132.3 m
4.0 m1541409649192.6 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².