LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-ML1508

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireTara - Wall Surface, 36 degLamp / LEDIntegrated LED module
Luminous flux520 lmInput power8.0 W
Efficacy65.0 lm/WCCT
CRI>90BUG rating (TM-15-11)B1-U0-G0
Beam angle (50% Imax)36.0°Field angle (10% Imax)59.4°
VoltageAC220~240V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity1,337.9 cd
At angle0° VLuminous shapeCircular
Luminous size600 mm dia.Spacing/height (nominal)1.14

Luminous intensity (cd)

3346691003133890°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°48693.4%
0–60°520100.0%
0–90° (total)520100.0%

Flux emitted within each downward cone. 59% of the total falls inside the rated beam angle.

BUG rating B1-U0-G0

ZoneBack lmFront lm
Low 0–30°243243
Mid 30–60°1717
High 60–80°00
Very high 80–90°00
Uplight 90–100° / 100–180°0 / 0

Backlight, Uplight and Glare classes from the zone lumens, IES TM-15-11 limits. Calculated from this distribution.

Illuminance cone

1 m1338 luxØ0.6 m2 m334 luxØ1.3 m3 m149 luxØ1.9 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
1,337.946°1.8
1,337.047°1.3
1,333.248°0.9
1,325.449°0.6
1,313.150°0.4
1,295.751°0.3
1,273.152°0.2
1,245.253°0.0
1,211.854°0.0
1,173.355°0.0
10°1,129.856°0.0
11°1,081.757°0.0
12°1,029.658°0.0
13°974.059°0.0
14°915.760°0.0
15°855.261°0.0
16°793.562°0.0
17°731.163°0.0
18°669.064°0.0
19°607.765°0.0
20°548.066°0.0
21°490.567°0.0
22°435.768°0.0
23°384.069°0.0
24°335.770°0.0
25°291.271°0.0
26°250.572°0.0
27°213.773°0.0
28°180.874°0.0
29°151.675°0.0
30°126.176°0.0
31°103.977°0.0
32°84.978°0.0
33°68.779°0.0
34°55.180°0.0
35°43.881°0.0
36°34.582°0.0
37°26.983°0.0
38°20.884°0.0
39°15.985°0.0
40°12.086°0.0
41°9.087°0.0
42°6.788°0.0
43°4.989°0.0
44°3.690°0.0
45°2.6

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m33420941401.3 m
2.5 m214161571111.6 m
3.0 m149123611841.9 m
3.5 m10996582472.3 m
4.0 m84765226102.6 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².