LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-PL233015

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireDropy - Suspended & Pendant, 36 degLamp / LEDIntegrated LED module
Luminous flux1,800 lmInput power15.0 W
Efficacy120.0 lm/WCCT
CRI>90UGR<19
Beam angle (50% Imax)36.0°Field angle (10% Imax)59.4°
VoltageAC220~240V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity4,631.3 cd
At angle0° VLuminous shapeCircular
Luminous size120 mm dia.Spacing/height (nominal)1.14

Luminous intensity (cd)

115823163473463190°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°1,68193.4%
0–60°1,800100.0%
0–90° (total)1,800100.0%

Flux emitted within each downward cone. 59% of the total falls inside the rated beam angle.

Illuminance cone

1 m4631 luxØ0.6 m2 m1158 luxØ1.3 m3 m515 luxØ1.9 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
4,631.346°6.4
4,628.147°4.5
4,614.848°3.1
4,587.949°2.2
4,545.250°1.5
4,485.251°1.0
4,407.052°0.7
4,310.253°0.0
4,194.854°0.0
4,061.355°0.0
10°3,910.756°0.0
11°3,744.457°0.0
12°3,564.058°0.0
13°3,371.759°0.0
14°3,169.660°0.0
15°2,960.461°0.0
16°2,746.662°0.0
17°2,530.863°0.0
18°2,315.664°0.0
19°2,103.665°0.0
20°1,897.066°0.0
21°1,697.967°0.0
22°1,508.168°0.0
23°1,329.169°0.0
24°1,162.270°0.0
25°1,008.071°0.0
26°867.272°0.0
27°739.873°0.0
28°625.874°0.0
29°524.975°0.0
30°436.576°0.0
31°359.777°0.0
32°293.878°0.0
33°237.879°0.0
34°190.880°0.0
35°151.681°0.0
36°119.482°0.0
37°93.183°0.0
38°71.984°0.0
39°55.085°0.0
40°41.786°0.0
41°31.287°0.0
42°23.288°0.0
43°17.189°0.0
44°12.490°0.0
45°8.9

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m1,1587221421211.3 m
2.5 m7415561983751.6 m
3.0 m51542621163131.9 m
3.5 m37833120082252.3 m
4.0 m28926218092362.6 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².