LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-UL655001

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireFloory - Floor Lights, 45 degLamp / LEDIntegrated LED module
Luminous flux120 lmInput power1.0 W
Efficacy120.0 lm/WCCT
CRI>90BUG rating (TM-15-11)B0-U0-G0
Beam angle (50% Imax)45.0°Field angle (10% Imax)74.2°
VoltageAC220~240V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity199.6 cd
At angle0° VLuminous shapeCircular
Luminous size75 mm dia.Spacing/height (nominal)1.51

Luminous intensity (cd)

5010015020090°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°9881.3%
0–60°120100.0%
0–90° (total)120100.0%

Flux emitted within each downward cone. 59% of the total falls inside the rated beam angle.

BUG rating B0-U0-G0

ZoneBack lmFront lm
Low 0–30°4949
Mid 30–60°1111
High 60–80°00
Very high 80–90°00
Uplight 90–100° / 100–180°0 / 0

Backlight, Uplight and Glare classes from the zone lumens, IES TM-15-11 limits. Calculated from this distribution.

Illuminance cone

1 m200 luxØ0.8 m2 m50 luxØ1.7 m3 m22 luxØ2.5 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
199.646°4.2
199.547°3.4
199.148°2.8
198.549°2.2
197.450°1.8
195.851°1.4
193.852°1.1
191.353°0.9
188.354°0.7
184.855°0.5
10°180.756°0.4
11°176.257°0.3
12°171.258°0.2
13°165.759°0.2
14°159.860°0.1
15°153.661°0.1
16°147.062°0.1
17°140.163°0.1
18°133.064°0.0
19°125.765°0.0
20°118.366°0.0
21°110.967°0.0
22°103.568°0.0
23°96.169°0.0
24°88.870°0.0
25°81.771°0.0
26°74.872°0.0
27°68.273°0.0
28°61.874°0.0
29°55.875°0.0
30°50.176°0.0
31°44.777°0.0
32°39.778°0.0
33°35.179°0.0
34°30.880°0.0
35°27.081°0.0
36°23.482°0.0
37°20.383°0.0
38°17.484°0.0
39°14.985°0.0
40°12.786°0.0
41°10.787°0.0
42°9.088°0.0
43°7.589°0.0
44°6.290°0.0
45°5.1

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m503613301.7 m
2.5 m322613512.1 m
3.0 m222012622.5 m
3.5 m161511632.9 m
4.0 m12129633.3 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².