LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-STL351010

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireDor - Wall Surface, 110 degLamp / LEDIntegrated LED module
Luminous flux800 lmInput power10.0 W
Efficacy80.0 lm/WCCT
CRI>90BUG rating (TM-15-11)B1-U0-G0
Beam angle (50% Imax)110.0°Field angle (10% Imax)157.4°
VoltageAC220~240V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity281.4 cd
At angle0° VLuminous shapeCircular
Luminous size150 mm dia.Spacing/height (nominal)10.01

Luminous intensity (cd)

7014121128190°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°22928.7%
0–60°65882.3%
0–90° (total)800100.0%

Flux emitted within each downward cone. 75% of the total falls inside the rated beam angle.

BUG rating B1-U0-G0

ZoneBack lmFront lm
Low 0–30°115115
Mid 30–60°215215
High 60–80°6363
Very high 80–90°88
Uplight 90–100° / 100–180°0 / 0

Backlight, Uplight and Glare classes from the zone lumens, IES TM-15-11 limits. Calculated from this distribution.

Illuminance cone

1 m281 luxØ2.9 m2 m70 luxØ5.7 m3 m31 luxØ8.6 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
281.446°192.7
281.447°187.3
281.448°181.7
281.449°176.1
281.450°170.3
281.351°164.5
281.352°158.6
281.253°152.7
281.154°146.7
281.055°140.7
10°280.856°134.7
11°280.557°128.7
12°280.258°122.8
13°279.959°116.9
14°279.560°111.0
15°279.061°105.3
16°278.462°99.6
17°277.763°94.0
18°276.964°88.6
19°276.165°83.3
20°275.166°78.1
21°274.067°73.1
22°272.768°68.2
23°271.369°63.5
24°269.870°59.0
25°268.271°54.7
26°266.372°50.6
27°264.473°46.7
28°262.274°43.0
29°259.975°39.4
30°257.476°36.1
31°254.777°33.0
32°251.978°30.1
33°248.879°27.3
34°245.680°24.8
35°242.281°22.4
36°238.682°20.3
37°234.883°18.2
38°230.884°16.4
39°226.685°14.7
40°222.386°13.2
41°217.787°11.8
42°213.088°10.5
43°208.289°9.4
44°203.290°0.0
45°198.0

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m70644730185.7 m
2.5 m45423526177.1 m
3.0 m31302621168.6 m
3.5 m232220171410.0 m
4.0 m181716141211.4 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².