LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-STL357508

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireClear - Wall Recessed, 36 degLamp / LEDIntegrated LED module
Luminous flux800 lmInput power8.0 W
Efficacy100.0 lm/WCCT
CRI>90BUG rating (TM-15-11)B1-U0-G0
Beam angle (50% Imax)36.0°Field angle (10% Imax)59.4°
VoltageAC220~240V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity2,058.3 cd
At angle0° VLuminous shapeCircular
Luminous size195 mm dia.Spacing/height (nominal)1.14

Luminous intensity (cd)

51510291544205890°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°74793.4%
0–60°800100.0%
0–90° (total)800100.0%

Flux emitted within each downward cone. 59% of the total falls inside the rated beam angle.

BUG rating B1-U0-G0

ZoneBack lmFront lm
Low 0–30°374374
Mid 30–60°2626
High 60–80°00
Very high 80–90°00
Uplight 90–100° / 100–180°0 / 0

Backlight, Uplight and Glare classes from the zone lumens, IES TM-15-11 limits. Calculated from this distribution.

Illuminance cone

1 m2058 luxØ0.6 m2 m515 luxØ1.3 m3 m229 luxØ1.9 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
2,058.346°2.8
2,056.947°2.0
2,051.048°1.4
2,039.149°1.0
2,020.150°0.7
1,993.451°0.4
1,958.752°0.3
1,915.653°0.0
1,864.354°0.0
1,805.055°0.0
10°1,738.156°0.0
11°1,664.257°0.0
12°1,584.058°0.0
13°1,498.559°0.0
14°1,408.760°0.0
15°1,315.761°0.0
16°1,220.762°0.0
17°1,124.863°0.0
18°1,029.264°0.0
19°934.965°0.0
20°843.166°0.0
21°754.667°0.0
22°670.368°0.0
23°590.769°0.0
24°516.570°0.0
25°448.071°0.0
26°385.472°0.0
27°328.873°0.0
28°278.274°0.0
29°233.375°0.0
30°194.076°0.0
31°159.977°0.0
32°130.678°0.0
33°105.779°0.0
34°84.880°0.0
35°67.481°0.0
36°53.082°0.0
37°41.483°0.0
38°32.084°0.0
39°24.485°0.0
40°18.586°0.0
41°13.987°0.0
42°10.388°0.0
43°7.689°0.0
44°5.590°0.0
45°4.0

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m51532163501.3 m
2.5 m329247881621.6 m
3.0 m229189942861.9 m
3.5 m1681478937112.3 m
4.0 m1291178041162.6 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².