LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-ODL348512

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireHalf Bulk - Wall Surface, 90 degLamp / LEDIntegrated LED module
Luminous flux1,440 lmInput power12.0 W
Efficacy120.0 lm/WCCT
CRI>90BUG rating (TM-15-11)B1-U0-G0
Beam angle (50% Imax)90.0°Field angle (10% Imax)130.2°
VoltageAC220~240V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity710.5 cd
At angle0° VLuminous shapeCircular
Luminous size275 mm dia.Spacing/height (nominal)4.30

Luminous intensity (cd)

17835553371190°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°56138.9%
0–60°1,32892.2%
0–90° (total)1,440100.0%

Flux emitted within each downward cone. 72% of the total falls inside the rated beam angle.

BUG rating B1-U0-G0

ZoneBack lmFront lm
Low 0–30°280280
Mid 30–60°384384
High 60–80°5050
Very high 80–90°66
Uplight 90–100° / 100–180°0 / 0

Backlight, Uplight and Glare classes from the zone lumens, IES TM-15-11 limits. Calculated from this distribution.

Illuminance cone

1 m711 luxØ2.0 m2 m178 luxØ4.0 m3 m79 luxØ6.0 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
710.546°337.0
710.547°318.8
710.548°300.7
710.449°282.9
710.350°265.4
710.151°248.2
709.852°231.5
709.453°215.3
708.954°199.6
708.155°184.4
10°707.256°170.0
11°706.057°156.1
12°704.558°143.0
13°702.759°130.6
14°700.660°118.9
15°698.061°108.0
16°695.162°97.8
17°691.763°88.4
18°687.964°79.7
19°683.565°71.6
20°678.666°64.3
21°673.267°57.7
22°667.168°51.6
23°660.469°46.2
24°653.170°41.3
25°645.171°37.0
26°636.472°33.1
27°627.073°29.7
28°617.074°26.7
29°606.275°24.1
30°594.776°21.8
31°582.577°19.8
32°569.778°18.0
33°556.279°16.5
34°542.080°15.2
35°527.281°14.1
36°511.882°13.2
37°495.983°12.3
38°479.584°11.6
39°462.685°11.0
40°445.386°10.4
41°427.787°9.9
42°409.888°9.5
43°391.889°9.1
44°373.590°0.0
45°355.3

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m17816011364314.0 m
2.5 m1141068659365.0 m
3.0 m79756550356.0 m
3.5 m58565042327.0 m
4.0 m44434035288.0 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².