LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-ODL357012

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireLUXE - Wall Surface, 60 degLamp / LEDIntegrated LED module
Luminous flux1,440 lmInput power12.0 W
Efficacy120.0 lm/WCCT
CRI>90BUG rating (TM-15-11)B1-U0-G0
Beam angle (50% Imax)60.0°Field angle (10% Imax)99.0°
VoltageAC220~240V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity1,376.3 cd
At angle0° VLuminous shapeCircular
Luminous size91 mm dia.Spacing/height (nominal)2.34

Luminous intensity (cd)

3446881032137690°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°86560.1%
0–60°1,41998.5%
0–90° (total)1,440100.0%

Flux emitted within each downward cone. 60% of the total falls inside the rated beam angle.

BUG rating B1-U0-G0

ZoneBack lmFront lm
Low 0–30°433433
Mid 30–60°277277
High 60–80°1010
Very high 80–90°00
Uplight 90–100° / 100–180°0 / 0

Backlight, Uplight and Glare classes from the zone lumens, IES TM-15-11 limits. Calculated from this distribution.

Illuminance cone

1 m1376 luxØ1.2 m2 m344 luxØ2.3 m3 m153 luxØ3.5 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
1,376.346°199.1
1,376.047°179.7
1,374.848°161.7
1,372.549°145.0
1,368.750°129.7
1,363.451°115.6
1,356.452°102.7
1,347.653°91.0
1,336.954°80.3
1,324.255°70.7
10°1,309.656°62.0
11°1,293.057°54.2
12°1,274.458°47.2
13°1,253.959°41.0
14°1,231.360°35.5
15°1,206.961°30.6
16°1,180.662°26.3
17°1,152.663°22.5
18°1,122.964°19.2
19°1,091.765°16.3
20°1,059.166°13.9
21°1,025.267°11.7
22°990.268°9.8
23°954.169°8.3
24°917.370°6.9
25°879.771°5.7
26°841.772°4.8
27°803.473°3.9
28°764.974°3.2
29°726.475°2.7
30°688.176°2.2
31°650.277°1.8
32°612.778°1.4
33°575.879°1.2
34°539.880°0.9
35°504.681°0.7
36°470.482°0.6
37°437.383°0.5
38°405.384°0.4
39°374.785°0.3
40°345.486°0.2
41°317.487°0.2
42°290.988°0.1
43°265.789°0.0
44°242.190°0.0
45°219.8

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m34428114757192.3 m
2.5 m22019412866292.9 m
3.0 m15314010565353.5 m
3.5 m1121068660374.0 m
4.0 m86827053374.6 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².