LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-ODL242712

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireROMA I - Ceiling Surface Lights, 35 degLamp / LEDIntegrated LED module
Luminous flux1,440 lmInput power12.0 W
Efficacy120.0 lm/WCCT
CRI>90BUG rating (TM-15-11)B2-U0-G0
Beam angle (50% Imax)35.0°Field angle (10% Imax)57.7°
VoltageAC220~240V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity3,916.0 cd
At angle0° VLuminous shapeCircular
Luminous size70 mm dia.Spacing/height (nominal)1.10

Luminous intensity (cd)

97919582937391690°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°1,36094.5%
0–60°1,440100.0%
0–90° (total)1,440100.0%

Flux emitted within each downward cone. 59% of the total falls inside the rated beam angle.

BUG rating B2-U0-G0

ZoneBack lmFront lm
Low 0–30°680680
Mid 30–60°4040
High 60–80°00
Very high 80–90°00
Uplight 90–100° / 100–180°0 / 0

Backlight, Uplight and Glare classes from the zone lumens, IES TM-15-11 limits. Calculated from this distribution.

Illuminance cone

1 m3916 luxØ0.6 m2 m979 luxØ1.3 m3 m435 luxØ1.9 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
3,916.046°3.4
3,913.147°2.3
3,901.148°1.6
3,876.849°1.1
3,838.250°0.7
3,784.051°0.5
3,713.452°0.0
3,626.253°0.0
3,522.454°0.0
3,402.655°0.0
10°3,267.856°0.0
11°3,119.357°0.0
12°2,958.858°0.0
13°2,788.359°0.0
14°2,609.960°0.0
15°2,426.061°0.0
16°2,239.062°0.0
17°2,051.363°0.0
18°1,865.364°0.0
19°1,683.265°0.0
20°1,506.966°0.0
21°1,338.367°0.0
22°1,178.968°0.0
23°1,029.969°0.0
24°892.170°0.0
25°766.171°0.0
26°652.172°0.0
27°550.273°0.0
28°460.174°0.0
29°381.175°0.0
30°312.876°0.0
31°254.477°0.0
32°204.978°0.0
33°163.479°0.0
34°129.180°0.0
35°100.981°0.0
36°78.182°0.0
37°59.983°0.0
38°45.484°0.0
39°34.185°0.0
40°25.386°0.0
41°18.687°0.0
42°13.588°0.0
43°9.789°0.0
44°6.990°0.0
45°4.9

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m979594106801.3 m
2.5 m6274631552631.6 m
3.0 m4353561694791.9 m
3.5 m32027816364182.2 m
4.0 m24522114973272.5 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².