LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-DL2037220

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireSpoty III - Down Lights, 36 degLamp / LEDIntegrated LED module
Luminous flux4,800 lmInput power40.0 W
Efficacy120.0 lm/WCCT
CRI>90UGR<19
Beam angle (50% Imax)36.0°Field angle (10% Imax)59.4°
VoltageAC100~240V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity12,350.0 cd
At angle0° VLuminous shapeCircular
Luminous size280 mm dia.Spacing/height (nominal)1.14

Luminous intensity (cd)

3088617592631235090°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°4,48493.4%
0–60°4,800100.0%
0–90° (total)4,800100.0%

Flux emitted within each downward cone. 59% of the total falls inside the rated beam angle.

Illuminance cone

1 m12350 luxØ0.6 m2 m3088 luxØ1.3 m3 m1372 luxØ1.9 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
12,350.046°17.0
12,341.747°12.0
12,306.248°8.4
12,234.449°5.8
12,120.550°3.9
11,960.651°2.7
11,752.052°1.8
11,493.853°0.0
11,186.054°0.0
10,830.155°0.0
10°10,428.556°0.0
11°9,985.057°0.0
12°9,504.058°0.0
13°8,991.159°0.0
14°8,452.460°0.0
15°7,894.461°0.0
16°7,324.262°0.0
17°6,748.863°0.0
18°6,175.064°0.0
19°5,609.565°0.0
20°5,058.666°0.0
21°4,527.667°0.0
22°4,021.668°0.0
23°3,544.469°0.0
24°3,099.170°0.0
25°2,688.071°0.0
26°2,312.472°0.0
27°1,972.873°0.0
28°1,668.974°0.0
29°1,399.875°0.0
30°1,163.976°0.0
31°959.277°0.0
32°783.578°0.0
33°634.379°0.0
34°508.780°0.0
35°404.381°0.0
36°318.382°0.0
37°248.283°0.0
38°191.784°0.0
39°146.785°0.0
40°111.186°0.0
41°83.387°0.0
42°61.988°0.0
43°45.589°0.0
44°33.190°0.0
45°23.8

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m3,0881,9253793321.3 m
2.5 m1,9761,48452898121.6 m
3.0 m1,3721,135562169351.9 m
3.5 m1,008882534219652.3 m
4.0 m772700481244952.6 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².