LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-DL2050210

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireMeade - Down Lights, 36 degLamp / LEDIntegrated LED module
Luminous flux2,400 lmInput power20.0 W
Efficacy120.0 lm/WCCT
CRI>90UGR<19
Beam angle (50% Imax)36.0°Field angle (10% Imax)59.4°
VoltageAC100~240V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity6,175.0 cd
At angle0° VLuminous shapeCircular
Luminous size230 mm dia.Spacing/height (nominal)1.14

Luminous intensity (cd)

154430884631617590°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°2,24293.4%
0–60°2,400100.0%
0–90° (total)2,400100.0%

Flux emitted within each downward cone. 59% of the total falls inside the rated beam angle.

Illuminance cone

1 m6175 luxØ0.6 m2 m1544 luxØ1.3 m3 m686 luxØ1.9 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
6,175.046°8.5
6,170.847°6.0
6,153.148°4.2
6,117.249°2.9
6,060.350°2.0
5,980.351°1.3
5,876.052°0.9
5,746.953°0.0
5,593.054°0.0
5,415.155°0.0
10°5,214.356°0.0
11°4,992.557°0.0
12°4,752.058°0.0
13°4,495.659°0.0
14°4,226.260°0.0
15°3,947.261°0.0
16°3,662.162°0.0
17°3,374.463°0.0
18°3,087.564°0.0
19°2,804.865°0.0
20°2,529.366°0.0
21°2,263.867°0.0
22°2,010.868°0.0
23°1,772.269°0.0
24°1,549.670°0.0
25°1,344.071°0.0
26°1,156.272°0.0
27°986.473°0.0
28°834.574°0.0
29°699.975°0.0
30°581.976°0.0
31°479.677°0.0
32°391.878°0.0
33°317.179°0.0
34°254.480°0.0
35°202.181°0.0
36°159.182°0.0
37°124.183°0.0
38°95.984°0.0
39°73.385°0.0
40°55.586°0.0
41°41.787°0.0
42°30.988°0.0
43°22.789°0.0
44°16.690°0.0
45°11.9

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m1,5449621901611.3 m
2.5 m9887422644961.6 m
3.0 m68656828184181.9 m
3.5 m504441267110332.3 m
4.0 m386350241122472.6 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².