LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-389012

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireSurface Square - Ceiling Surface Lights, 36 degLamp / LEDIntegrated LED module
Luminous flux1,440 lmInput power12.0 W
Efficacy120.0 lm/WCCT
CRI>90UGR<19
Beam angle (50% Imax)36.0°Field angle (10% Imax)59.4°
Voltage

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity3,705.0 cd
At angle0° VLuminous shapeCircular
Luminous size170 mm dia.Spacing/height (nominal)1.14

Luminous intensity (cd)

92618532779370590°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°1,34593.4%
0–60°1,440100.0%
0–90° (total)1,440100.0%

Flux emitted within each downward cone. 59% of the total falls inside the rated beam angle.

Illuminance cone

1 m3705 luxØ0.6 m2 m926 luxØ1.3 m3 m412 luxØ1.9 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
3,705.046°5.1
3,702.547°3.6
3,691.948°2.5
3,670.349°1.7
3,636.250°1.2
3,588.251°0.8
3,525.652°0.5
3,448.153°0.0
3,355.854°0.0
3,249.055°0.0
10°3,128.656°0.0
11°2,995.557°0.0
12°2,851.258°0.0
13°2,697.359°0.0
14°2,535.760°0.0
15°2,368.361°0.0
16°2,197.362°0.0
17°2,024.663°0.0
18°1,852.564°0.0
19°1,682.965°0.0
20°1,517.666°0.0
21°1,358.367°0.0
22°1,206.568°0.0
23°1,063.369°0.0
24°929.770°0.0
25°806.471°0.0
26°693.772°0.0
27°591.873°0.0
28°500.774°0.0
29°419.975°0.0
30°349.276°0.0
31°287.877°0.0
32°235.178°0.0
33°190.379°0.0
34°152.680°0.0
35°121.381°0.0
36°95.582°0.0
37°74.583°0.0
38°57.584°0.0
39°44.085°0.0
40°33.386°0.0
41°25.087°0.0
42°18.688°0.0
43°13.689°0.0
44°9.990°0.0
45°7.2

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m9265771141011.3 m
2.5 m5934451582941.6 m
3.0 m41234116951111.9 m
3.5 m30226516066202.3 m
4.0 m23221014473282.6 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².