LIGHT PLUS UK

Photometric Data Sheet

CatalogueLP-SL 182918

Calculated photometric data — nominal values derived from a distribution model. Not LM-79 laboratory tested.

LuminaireRapo - Spot Lights, 36 degLamp / LEDIntegrated LED module
Luminous flux2,160 lmInput power18.0 W
Efficacy120.0 lm/WCCT
CRI>90UGR<19
Beam angle (50% Imax)36.0°Field angle (10% Imax)59.4°
Voltage220~240V

Goniometry summary

DistributionDirect, rotationally symmetricMaximum intensity5,557.5 cd
At angle0° VLuminous shapeCircular
Luminous size110 mm dia.Spacing/height (nominal)1.14

Luminous intensity (cd)

138927794168555890°90°

Polar distribution, rotationally symmetric. 0° is straight down.

Zonal lumen summary

ZoneLumens% of total
0–30°2,01893.4%
0–60°2,160100.0%
0–90° (total)2,160100.0%

Flux emitted within each downward cone. 59% of the total falls inside the rated beam angle.

Illuminance cone

1 m5558 luxØ0.6 m2 m1389 luxØ1.3 m3 m618 luxØ1.9 m

Centre-beam illuminance and beam diameter on a surface directly below.

Intensity table

γcdγcd
5,557.546°7.6
5,553.847°5.4
5,537.848°3.8
5,505.549°2.6
5,454.250°1.8
5,382.351°1.2
5,288.452°0.8
5,172.253°0.0
5,033.754°0.0
4,873.555°0.0
10°4,692.856°0.0
11°4,493.257°0.0
12°4,276.858°0.0
13°4,046.059°0.0
14°3,803.660°0.0
15°3,552.561°0.0
16°3,295.962°0.0
17°3,037.063°0.0
18°2,778.864°0.0
19°2,524.365°0.0
20°2,276.466°0.0
21°2,037.467°0.0
22°1,809.768°0.0
23°1,595.069°0.0
24°1,394.670°0.0
25°1,209.671°0.0
26°1,040.672°0.0
27°887.873°0.0
28°751.074°0.0
29°629.975°0.0
30°523.776°0.0
31°431.777°0.0
32°352.678°0.0
33°285.479°0.0
34°228.980°0.0
35°181.981°0.0
36°143.282°0.0
37°111.783°0.0
38°86.384°0.0
39°66.085°0.0
40°50.086°0.0
41°37.587°0.0
42°27.888°0.0
43°20.589°0.0
44°14.990°0.0
45°10.7

Candela at each vertical angle, C0-C180 plane.

Floor illuminance & spacing (lux)

Mounting heightcentre0.5 m1.0 m1.5 m2.0 mBeam Ø
2.0 m1,3898661711511.3 m
2.5 m8896682384461.6 m
3.0 m61851125376161.9 m
3.5 m45439724099292.3 m
4.0 m347315217110432.6 m

Horizontal illuminance directly below the fitting (centre) and at each radial offset, for a single fitting. Use it to judge spacing for uniform light. Point-source projection, E = I·cosθ / D².